Shop All Alfatron
Alfatron ALF-DAO-2XLR 2-Channel Analog Output Dante Adapter
The ALF-DAO-2XLR takes two channels from a Dante network and delivers them as balanced analog audio on male XLR connectors, so existing amplifiers, powered speakers and recorders can be fed from Dante. It is powered by a Class 1 802.3af PoE switch port.
Output level reaches +18 dBu at 48 kHz/24-bit, with frequency response of 20 Hz to 20 kHz (+/-0.1 dB), over 116 dB signal-to-noise ratio, 0.001% THD+N and Dante latency under 1 ms.
- Channels2 analog outputs
- ConnectorsRJ45 and 2 x XLR-M
- Max Output Level+18 dBu balanced
- Frequency Response20 Hz - 20 kHz (+/-0.1 dB)
- Dynamic Range116 dB
| Part Number | ALF-DAO-2XLR |
|---|---|
| Model | ALF-DAO-2XLR |
| Channels | 2 analog outputs |
| Connectors | RJ45 and 2 x -M |
| Max Output Level | +18 dBu balanced |
| Frequency Response | 20 Hz - 20 kHz (+/-0.1 dB) |
| Signal-to-Noise Ratio | >116 dB |
| Dynamic Range | 116 dB |
| THD+N | 0.001% at 1 kHz, 4 dBu |
| Impedance | 400 ohms |
| Dante Latency | Less than 1 ms |
| Sample Rate | 48 kHz |
| Bit Depth | 24-bit |
| Operating Temperature | -15 to 45 C |
| Power | Class 1 802.3af |
| Power Consumption | 10 W |
| UPC | 658325230895 |
| Brand | Alfatron |
XLRThe three-pin balanced audio connector used on professional microphones and mixers.
PoEPower over Ethernet. Power and data on one network cable.








