Shop All Alfatron
Alfatron ALF-DAI-2XLR 2-Channel Analog Input Dante Adapter
The ALF-DAI-2XLR converts two analog inputs on female XLR connectors to Dante, so existing mixers, wireless microphone receivers and other line sources can join an audio network without being replaced. It is powered by a Class 1 802.3af PoE switch port.
It accepts up to +18 dBu balanced and converts at 48 kHz/24-bit, with frequency response of 20 Hz to 20 kHz (+/-0.2 dB), over 110 dB signal-to-noise ratio, 0.007% THD+N and Dante latency under 1 ms.
- Channels2 analog inputs
- ConnectorsRJ45 and 2 x XLR-F
- Max Input Level+18 dBu balanced
- Frequency Response20 Hz - 20 kHz (+/-0.2 dB)
- Dynamic Range110 dB
| Part Number | ALF-DAI-2XLR |
|---|---|
| Model | ALF-DAI-2XLR |
| Channels | 2 analog inputs |
| Connectors | RJ45 and 2 x -F |
| Max Input Level | +18 dBu balanced |
| Frequency Response | 20 Hz - 20 kHz (+/-0.2 dB) |
| Signal-to-Noise Ratio | >110 dB |
| Dynamic Range | 110 dB |
| THD+N | 0.007% at 1 kHz, 4 dBu |
| Impedance | 6.75 kohms |
| Dante Latency | Less than 1 ms |
| Sample Rate | 48 kHz |
| Bit Depth | 24-bit |
| Operating Temperature | -15 to 45 C |
| Power | Class 1 802.3af |
| Power Consumption | 10 W |
| UPC | 658325230888 |
| Brand | Alfatron |
XLRThe three-pin balanced audio connector used on professional microphones and mixers.
PoEPower over Ethernet. Power and data on one network cable.








