Shop All TurtleAV
TurtleAV D2LDE Two-Channel Dante to Analog Line Output Adapter
The D2LDE is TurtleAV's two-channel Dante line output adapter, built on Audinate's Dante Ultimo 2x2 chip. It decodes two Dante channels to balanced or unbalanced analog line level on a 6-pin 3.5 mm Phoenix connector, with five output gain settings to match the device it feeds.
It powers from PoE or USB-C, configures entirely in Dante Controller, and can switch to AES67. The plastic housing is 90% recycled material. This is the standard adapter; the D2LDE-PRO is the metal-chassis converter version.
- Dimensions / Weight115 x 40 x 28 mm (W x D x H), 94 g
- InputDante 2CH, PCM 44.1 - 96 kHz 16/24-bit
- Output2-ch balanced/unbalanced line
- Output Impedance600 ohm balanced, 300 ohm unbalanced
- Frequency Response20 Hz to 20 kHz (+/-0.5 dB)
| Input | Dante 2CH, PCM 44.1 - 96 kHz 16/24-bit |
|---|---|
| Output | 2-ch balanced/unbalanced line, +18 dBu max (6-pin 3.5 mm Phoenix) |
| Output Impedance | 600 ohm balanced, 300 ohm unbalanced |
| Control | Dante Controller |
| Audio Latency | Configurable Dante device latency: 1, 2 or 5 ms |
| Frequency Response | 20 Hz to 20 kHz (+/-0.5 dB) |
| Dynamic Range | >100 dB @ 0 dBu, 1 kHz A-weighted |
| Power | (IEEE 802.3af Class 0) or USB-C 5 V/500 mA; 2 W max |
| Dimensions / Weight | 115 x 40 x 28 mm (W x D x H), 94 g |
PoEPower over Ethernet. Power and data on one network cable.








