AJA K3G-Box 1RU Breakout Box for KONA 4
The K3G-Box lets KONA 4 sit in a rack with every video and audio connection reachable without going to the back of the computer. Over the standard breakout cable it adds eight more AES audio channels, for 16 in and 16 out on eight BNCs, two RCA analog audio monitoring jacks and looping BNC genlock reference connectors.
The box connects to KONA 4 with a multi-pin cable. The four SDI ports reach its rear BNCs through the card's DIN 1.0/2.3 to BNC cable and appear on four front panel BNCs, and the card's mini-HDMI output appears on a full-size front HDMI connector. It also carries three BNCs for component, composite or Y/C monitoring, LTC in and out and a female RS-422 9-pin port.
- Compatible cardKONA 4
- Form factor1RU rack mount
- SDI4x 3G-SDI BNC, 16-channel embedded 24-bit audio
- AES/EBU audio8x BNC, 2 channels each, 16 channels in and out
- HDMI1x full-size HDMI out (8 channels embedded audio, no HDCP)
| Part Number | K3G-BOX-R0 |
|---|---|
| Form Factor | 1RU rack mount |
| SDI | 4x 3G- BNC, 16-channel embedded 24-bit audio |
| AES/EBU Audio | 8x BNC, 2 channels each, 16 channels in and out |
| HDMI | 1x full-size out (8 channels embedded audio, no HDCP) |
| Analog Video Out | 3x BNC component, composite or Y/C |
| Analog Audio Out | 2x RCA unbalanced |
| Reference | 2x looping BNC, terminated 75 ohm when is set to Ref In |
| Timecode | LTC in and out |
| Machine Control | RS-422, female 9-pin D, Sony protocol |
| Compatible Card | KONA 4 |
| UPC | 892448000366 |

- Multi-pin to multi-pin cable (KONA 4 to K3G-Box)









