Shop All Adder
ADDERLink XD642 Dual-Head 4K DisplayPort KVM Extender Pair, US Power
The ADDERLink XD642 extends two DisplayPort 1.2 screens at up to 4096 x 2160 at 60 Hz each; Adder notes that dual 4K60 requires the fiber link. A transparent high-speed USB 2.0 port sits beside three HID-emulated ports, and audio runs as 24-bit 96 kHz analog plus up to eight channels of DisplayPort PCM.
The link is one CATx cable or fiber through the SFP+ cage, with RS232 at 115,200 baud. Both fanless units run from 18 W supplies, included with country-specific mains cables.
- Dimensions (W x H x D)186mm / 7.3in x 39mm / 1.5in x 148mm / 5.80in
- Receiver DisplayPort outputs2x DisplayPort 1.2
- RJ45 link port1x
- Maximum resolution (1 screen)4096 x 2160
- Power100-240 VAC
| Part number | XD642P-DP-US |
|---|---|
| Receiver DisplayPort outputs | 2x DisplayPort 1.2 |
| Maximum resolution (1 screen) | 4096 x 2160 |
| Maximum resolution (2 screens) | 4096 x 2160 |
| Receiver USB | 3x 2.0 True Emulation (HID Only), Full Speed; 1x 2.0 Transparent, High Speed |
| RJ45 link port | 1x |
| SFP+ link port | 1x |
| RS232 max baud rate | 115200 |
| DisplayPort audio | 8 channels of 24-bit/192kHz PCM audio over the DisplayPort connection |
| Power | 100-240 VAC, 47/63Hz . 12 VDC 18W output from power supply unit |
| Dimensions (W x H x D) | 186mm / 7.3in x 39mm / 1.5in x 148mm / 5.80in |
| Weight | 1.24kg / 2.7lb |
| Operating temperature | 0 to 40 °C / 32 to 104 °F |
| Construction | Metal construction |

- 1x TX and RX pair
- 2x Power supply unit with country specific mains cable
- 2x DisplayPort cable (VSCD18)
- 1x USB cable (VSC24)
- 1x 2m/6ft Audio cable
- 1x Quick start guide









