ADDERLink XDIP HDMI and USB KVM over IP Extender with PSU, US Power (Single Unit)
The ADDERLink XDIP extends and switches HDMI video at up to 1920 x 1200 @ 60Hz, USB and bi-directional analog audio over a standard 1Gb/s IP network. Each unit can be set as a transmitter or a receiver, so the same hardware builds a point-to-point extender, a distributed KVM switch or an AV distribution system: each receiver sees up to 16 sources and each transmitter connects to up to 256 receivers.
This -US version is the XDIP-POE unit plus a 12V mains power adaptor with a US IEC lead, for networks without PoE. A RESTful API over HTTPS allows third-party control, and video and USB feed-through ports support a local console at the computer.
- Dimensions169mm / 6.7in (w) x 31mm / 1.2in (h) x 120mm / 4.70in (d)
- Link port1 x 8p8c (RJ45), 1GbE (no 10/100 support)
- Power inputPoE (802.3af) or external PSU, 12V 3-pin socket
- Maximum resolution1920 x 1200, 60Hz, 8 bpc
- Weight0.6kg / 1.3lb
| Part number | XDIP-US |
|---|---|
| Maximum resolution | 1920 x 1200, 60Hz, 8 bpc |
| Computer connections | 1 x USB B, 1 x |
| Console connections | 3 x USB A (true emulation, HID only), 1 x HDMI |
| Link port | 1 x 8p8c (RJ45), 1GbE (no 10/100 support) |
| Audio | Analog, 2 channel, bi-directional, 16 bit, 48kHz; 3.5mm in and out |
| Cable | CAT5e and above, maximum 100m / 328ft |
| Power input | (802.3af) or external PSU, 12V 3-pin socket |
| Dimensions | 169mm / 6.7in (w) x 31mm / 1.2in (h) x 120mm / 4.70in (d) |
| Weight | 0.6kg / 1.3lb |
| Operating temperature | 0 to 40 °C / 32 to 104 °F |
| MTBF | 700,000 h |
| Approvals | CE, FCC, KC, UKCA |
| Notes | Does not support HDCP or CEC control |

- 2 meter HDMI cable
- 2 meter USB A to B cable
- 2 meter 3.5mm jack audio cable
- Quick start guide
- PSU 12V
- IEC country specific cable (US)









