Adder logo
Shop All Adder

AdderView Matrix C110 HDMI Computer Access Module (CAM) for IP KVM Matrix

The AdderView Matrix C110 HDMI is a ZeroU computer access module (CAM) in the AdderView Matrix C100 series. It attaches to a computer through HDMI and USB and sends video, audio and USB over a single cable to the matrix, up to 100 m on CAT5e or better. Encoding is spatially lossless with 1:1 pixel mapping, and dithered or noisy video, which some Mac computers output, passes through.

It draws less than 3 W and can run from the computer's USB ports, with external or redundant PSU options. USB 2.0 class control can disable device types, audio runs as bi-directional USB stereo or embedded video stereo, and units ship zero-config with no drivers.

  • Dimensions55 x 25 x 110 mm (2.2 x 1 x 4.3 in), 300 mm flying lead
  • Link port1x 8p8c (RJ45), 1GbE
  • Maximum resolution2560 x 1600 at 60Hz, 8 bpc
  • PowerUSB power: 2x USB2.0 (2x 500mA @5V) 5W; external power: 5VDC
  • Power consumption3 W typical, 5 W maximum
Part numberAVM-C110-CAM-HM
Maximum resolution2560 x 1600 at 60Hz, 8 bpc
Computer connections1x , 2x USB A 2.0 (True Emulation, full/low/high speed)
Link port1x 8p8c (RJ45), 1GbE
CableCAT5e and above, up to 100 m / 328 ft
AudioDigital, 2 channel linear PCM over USB, 16-bit 48 kHz, bi-directional
PowerUSB power: 2x USB2.0 (2x 500mA @5V) 5W; external power: 5VDC, 1A (LPS)
Power consumption3 W typical, 5 W maximum
Dimensions55 x 25 x 110 mm (2.2 x 1 x 4.3 in), 300 mm flying lead
Weight0.2 kg / 0.4 lb
Operating temperature0 to 50 °C / 32 to 122 °F
MTBF836,000 h
System requirementsDoes not support HDCP or CEC control
ApprovalsCE, cULus - E476334, FCC, ICES, KC, RCM, UKCA
2items in the box
  • ADDERView Matrix C110 Computer Access Module (HDMI)
  • Quick start guide