ADDERLink INFINITY 1102 IP KVM Receiver, Single-Head DisplayPort, US Power
The ADDERLink INFINITY 1102 sends single-head DisplayPort video, USB 2.0 and audio over a standard 1GbE IP network with spatially lossless, 1:1 pixel-mapped encoding at up to 2560 x 1600 at 60 Hz. Each unit has an RJ45 port and an SFP cage, so the second link can be CATx or fiber and can be teamed with the first for redundancy.
Used in pairs it is a point-to-point extender; a receiver can also see up to 16 transmitters and switch between them, and Adder's AIM manager turns many units into a KVM matrix. USB class control can block non-HID devices such as mass storage.
- Dimensions (W x D x H)186 mm/7.3 in x 150 mm/5.9 in x 39 mm/1.5 in
- Maximum resolution2560 x 1600 @ 60 Hz (single display)
- Power12 VDC, 1.5 A external power adapter
- Weight1.1 kg / 2.4 lb
- Video1x DisplayPort
| Part number | ALIF1102R-US |
|---|---|
| Video | 1x DisplayPort; via VSCD19 or VSCD20 DisplayPort to HDMI adaptor cables |
| Maximum resolution | 2560 x 1600 @ 60 Hz (single display) |
| USB | 4x USB Type A, USB 2.0 (low, full and high speed); non-HID devices can be blocked |
| Audio | 1x 3.5 mm analog audio out, 1x 3.5 mm headset/microphone; analog stereo 16-bit 48 kHz bi-directional |
| Network | 1x 8p8c RJ45 CATx port plus 1x SFP socket for 1GbE fiber or CATx |
| Power | 12 VDC, 1.5 A external power adapter |
| Dimensions (W x D x H) | 186 mm/7.3 in x 150 mm/5.9 in x 39 mm/1.5 in |
| Weight | 1.1 kg / 2.4 lb |
| Operating temperature | 0 to 40 °C / 32 to 104 °F |
| Approvals | CE, UKCA, FCC, ICES, cULus, RCM |

- ALIF1100 RX unit
- Power adapter with locking connector and country-specific power cord
- Information wallet: four self-adhesive rubber feet, quick start guide, safety document









