Adder logo
Shop All Adder

ADDERLink INFINITY 1102 IP KVM Receiver, DisplayPort, with 1GbE PoE Splitter

The ADDERLink INFINITY 1102 sends single-head DisplayPort video, USB 2.0 and audio over a standard 1GbE IP network with spatially lossless, 1:1 pixel-mapped encoding at up to 2560 x 1600 at 60 Hz. Each unit has an RJ45 port and an SFP cage, so the second link can be CATx or fiber and can be teamed with the first for redundancy.

Used in pairs it is a point-to-point extender; a receiver can also see up to 16 transmitters and switch between them, and Adder's AIM manager turns many units into a KVM matrix. USB class control can block non-HID devices such as mass storage. This part number pairs the receiver with a 1GbE IEEE802.3af PoE splitter; Adder's manual describes connecting the splitter's power plug to the receiver's power input and its RJ45 to the PoE switch.

  • Dimensions (W x D x H)186 mm/7.3 in x 150 mm/5.9 in x 39 mm/1.5 in
  • Maximum resolution2560 x 1600 @ 60 Hz (single display)
  • Weight1.1 kg / 2.4 lb
  • Video1x DisplayPort
  • USB4x USB Type A, USB 2.0 (low, full and high speed)
Part numberALIF1102R-
Video1x DisplayPort; via VSCD19 or VSCD20 DisplayPort to HDMI adaptor cables
Maximum resolution2560 x 1600 @ 60 Hz (single display)
USB4x USB Type A, USB 2.0 (low, full and high speed); non-HID devices can be blocked
Audio1x 3.5 mm analog audio out, 1x 3.5 mm headset/microphone; analog stereo 16-bit 48 kHz bi-directional
Network1x 8p8c RJ45 CATx port plus 1x SFP socket for 1GbE fiber or CATx
Dimensions (W x D x H)186 mm/7.3 in x 150 mm/5.9 in x 39 mm/1.5 in
Weight1.1 kg / 2.4 lb
Operating temperature0 to 40 °C / 32 to 104 °F
ApprovalsCE, UKCA, FCC, ICES, cULus, RCM
PowerVia supplied 1GbE PoE splitter (IEEE802.3af per distributor listing) or 12 VDC adapter input