Yealink AVBridge Dante Audio Box and A/V Signal Extender
AVBridge is a 150 x 100 x 28 mm audio box with 4x4 Dante (AES67) channels, a 3-pin Phoenix analog input, a 5-pin Phoenix analog output and USB extension. Its built-in matrix mixer and PEQ handle routing and basic room tuning, and it is set up with a one-touch deployment button or Yealink Room Designer.
Yealink positions it as the processor for CM20 and CM50 ceiling microphones with Yealink or third-party Dante and analog speakers, and as an A/V extender that carries camera or audio signals to the host PC for BYOM rooms. It runs on PoE and draws 13 W at full load.
- Product150 × 100 × 28 mm
- Dante Channels4 input, 4 output; 100 Hz - 20 kHz; 48 kHz, 24 bit
- USB Channels48 kHz/16 kHz sampling, 16 bit/24 bit
- Analog Input1 × 3-pin Phoenix connector analog input
- Analog Output1 × 5-pin Phoenix connector analog output
| Part number | 1303215 |
|---|---|
| Model | AVBridge |
| Dante Channels | 4 input, 4 output; 100 Hz - 20 kHz; 48 kHz, 24 bit; dynamic range 97dB |
| Analog Input | 1 × 3-pin Phoenix connector analog input |
| Analog Output | 1 × 5-pin Phoenix connector analog output |
| Analog Input Gain Range | 0 to 11 dB |
| USB Channels | 48 kHz/16 kHz sampling, 16 bit/24 bit |
| Power Supply | (Power over Ethernet) |
| Power Consumption | 13 W full load, 8 W no load |
| Product Dimensions | 150 × 100 × 28 mm |
| Product Weight | 315 g |
| Operating Temperature | 0 - 40 ℃ |









