Vaddio RoboSHOT 12 HDBT OneLINK Bridge System

This system pairs the RoboSHOT 12 HDBT PTZ camera with a OneLINK Bridge interface, a combination built for small to medium rooms that need to reach soft codecs and pro AV gear at once. The camera uses a 1/2.8-type Exmor CMOS sensor for native 1080p/60, and its lens covers a 67.3-degree field of view in the default 10x mode or opens to a 73-degree wide angle with 12x reach in Super-Wide mode. Tri-Synchronous Motion coordinates all three axes between presets, and silent direct-drive motors run from 0.35 up to 120 degrees per second.

The camera connects to the OneLINK Bridge over a single Cat-5e cable that carries video, power, and control up to 328 feet. The Bridge then fans that out to simultaneous uncompressed USB 3.0, HDMI up to 2160p/30, and 3Gb/s HD-SDI, and adds two balanced mic/line audio inputs and two line outputs with a built-in mixer for BYOD conference rooms. The system ships with the RoboSHOT 12 HDBT camera, Thin Profile Wall Mount with hardware, IR Remote Commander, OneLINK Bridge interface, 48V power supply, EZCamera RS-232 adapter, four Phoenix connectors, a 6 ft USB 3.0 cable, and Quick-Start Guides.