SWIT LA-WR8-KIT Pocket Wireless DMX Controller Kit
The LA-WR8-KIT bridges a lighting board to SWIT panels without running physical DMX cable. The pocket LA-WR8 controller transmits over 2.4GHz to up to 400 meters line-of-sight, addressing 8 channels across 7 groups, so one transmitter can run several fixtures on separate universes from a single position.
Each kit includes three LA-WR8-R receivers small enough to plug straight into a light's own USB port, exactly the socket called out on the CL-60D panel, so there is no separate power supply to route per fixture. The controller runs off two AA batteries or a 5V Micro USB source, and both ends are light enough to leave mounted permanently rather than striking after every shoot.
| Wireless | 2.4 GHz, up to 400m line-of-sight |
|---|---|
| Channels | 8 channels x 7 groups, 56 total |
| Controller Power | 2x AA batteries or 5V Micro USB |
| Controller Size | 184 x 84 x 22 mm, approx. 274 g |
| Receiver Power | 5V Micro USB, 0.5W |
| Receiver Size | 110 x 70 x 12 mm, approx. 47 g |
| Included | 1x LA-WR8 controller, 3x LA-WR8-R receivers, 3x Micro USB cables |












