Rode LPA1 Low Profile Studio Arm
The LPA1 is the Rode low-profile studio arm, built for video podcasts, streams and any desk where the microphone has to be close to the talker without filling the frame. It runs flat and low, under a camera's usual line of sight, and reaches 750 mm out horizontally, 525 mm above the desk or 200 mm below it. A ball-head mount with 360-degree articulation sets the angle, and the joints move without noise, so the mic can be repositioned during a recording.
The arm is metal and carries up to 2 kg, the highest load of any Rode studio arm, so a heavy broadcast dynamic, a camera or a light all fit. The included clamp fits desks up to 70 mm thick with no drilling, and 1/4 in, 3/8 in and 5/8 in threads cover most mics and accessories. An XLR or USB cable runs along the arm and is held by four supplied clips. Folded, it measures 367 mm long and 150 mm high.
- Weight1,650 g
- Thread Compatibility1/4 in UNC, 3/8 in UNC, 5/8 in UNS
- MountingDesk clamp, up to 70 mm
- TypeLow-profile studio arm
- Maximum Load2 kg (4.4 lbs)
| Type | Low-profile studio arm |
|---|---|
| Maximum Load | 2 kg (4.4 lbs) |
| Reach | 750 mm extended horizontal; 525 mm above desk; -200 mm below desk |
| Length | 750 mm extended, 367 mm folded |
| Folded Height | 150 mm |
| Width | 75 mm |
| Thread Compatibility | 1/4 in UNC, 3/8 in UNC, 5/8 in UNS |
| Mounting | Desk clamp, up to 70 mm |
| Weight | 1,650 g |









