Hartke HyDrive HL115 Lightweight 1x15 Bass Cabinet
The HyDrive HL115 pairs Hartke's HyDrive speaker technology, the two-piece anodized aluminum and paper composite cone, with a modern lightweight cabinet built to survive a full tour without wearing out the bassist carrying it. A single 15-inch driver handles 500 W RMS, with a 1-inch tweeter covering the top end, in a front-ported vented enclosure that weighs just 39.1 pounds.
Construction is kiln-dried plywood with extensive bracing and dado joinery, wrapped in a textured paint finish behind a black perforated steel grille. Inputs run on two Twist and Lock and two 1/4-inch jacks wired in parallel, so it stacks cleanly with any HyDrive HD or HL cabinet in the line.
| Power Handling | 500 W RMS |
|---|---|
| Impedance | 8 ohms |
| LF Driver | 15 inch HyDrive paper/aluminum hybrid cone, neodymium magnet |
| HF Driver | 1 inch |
| Frequency Response | 35 Hz - 17 kHz (-3 dB), 20 Hz - 17 kHz (-10 dB) |
| Inputs | 2 x Twist and Lock, 2 x 1/4 inch, wired in parallel |
| Cabinet | Front-ported vented, kiln dried plywood, dado joinery, textured paint |
| Dimensions / Weight | 24 x 24 x 15 in (618 x 618 x 381 mm) / 39.16 lb (17.8 kg) |








