Gefen EXT-UHDA-HBTL-RX 4K HDBaseT Receiver with Audio De-Embedder and POH
The EXT-UHDA-HBTL-RX receives HDMI over a single CAT-5e cable from a compatible HDBaseT sender, up to 70 m (230 ft) at 1080p or 40 m (130 ft) at 4K. With the sender it also extends bi-directional RS-232 and IR, so sources can be controlled from the display end or the other way round.
Audio is de-embedded to analog L/R on a 3.5 mm jack, TOSLINK optical and coaxial RCA. Bi-directional Power over HDBaseT lets either end power the other, so only one 12V DC supply is needed. Gefen recommends the EXT-UHDV-HBTLS-TX sender; the EXT-UHDV-WP-HBTLS-TX and EXT-4K300A-MF-41-HBTLS also work. Sender sold separately.
- Dimensions (W x H x D)6 x 0.65 x 4 in without brackets, 0.6 lbs
- Video output(1) HDMI Type A 19-pin, female
- Audio outputs3.5 mm analog L/R, TOSLINK optical, RCA coaxial digital
- Power12V DC, locking; 9 W max, 22 W max when powering a sender
- Bandwidth300 MHz TMDS clock, 10.2 Gbps
| Part number | EXT-UHDA-HBTL-RX |
|---|---|
| Bandwidth | 300 MHz TMDS clock, 10.2 Gbps |
| Distance | 70 m (230 ft) at 1080p, 40 m (130 ft) at 4K, CAT-5e |
| Video output | (1) Type A 19-pin, female |
| Audio outputs | 3.5 mm analog L/R, TOSLINK optical, RCA coaxial digital |
| Control | RS-232 on 3-pin Phoenix, 3.5 mm IR in/ext, 3.5 mm IR out |
| Link | (1) RJ-45, shielded |
| Power | 12V DC, locking; 9 W max, 22 W max when powering a sender |
| Dimensions (W x H x D) | 6 x 0.65 x 4 in (152 x 17 x 100 mm) without brackets, 0.6 lbs |









