Gefen logo
Shop All Gefen

Gefen Gen 2.0 Digital and Analog Audio over IP Sender and Receiver

Gefen's Gen 2.0 audio over IP system moves audio and control across a standard gigabit LAN. The sender takes analog L/R (3.5 mm), coaxial digital (RCA) and optical (TOSLINK) audio, plus RS-232 and two-way IR, and any configured receiver on the network plays them out on matching connectors. Formats run from analog stereo and 2-channel PCM up to 5.1-channel bitstream. Audio and control route independently for multi-zone systems, and a network can grow past 65,000 units.

The network needs a managed gigabit switch with jumbo frames (8k or larger) and IGMP snooping, and each cable run must stay within 330 ft (100 m). Units run from an 802.3af PoE switch port or the included 5 V supply. Sender and receiver are sold separately: start with one of each and add receivers for more zones. Setup runs through Gefen Syner-G, and Gefen recommends its EXT-CU-LAN controller for full control.

  • Dimensions8.4" x 1.0" x 4.9" (214mm x 25mm x 123mm), 1.6 lbs each
  • Sender inputs3.5mm mini-stereo, TOSLINK, RCA coax
  • Audio formatsAnalog L/R stereo, 2-channel PCM
  • Power802.3af PoE or 5V DC locking; sender 3W, receiver 7W maximum
  • ControlRS-232 (3.5mm), IR in/ext and IR out on each unit
Part numbersEXT-ADA-LAN-TX (sender), EXT-ADA-LAN-RX (receiver)
Audio formatsAnalog L/R stereo, 2-channel PCM, up to 5.1 channels of bitstream
Sender inputs3.5mm mini-stereo, TOSLINK, RCA coax
Receiver outputs3.5mm mini-stereo, TOSLINK, RCA coax
ControlRS-232 (3.5mm), IR in/ext and IR out on each unit
NetworkRJ-45 shielded, gigabit LAN, up to 330 ft (100 m) per run; managed switch with jumbo frames and IGMP snooping
Power802.3af or 5V DC locking; sender 3W, receiver 7W maximum
Dimensions8.4" x 1.0" x 4.9" (214mm x 25mm x 123mm), 1.6 lbs (0.72 kg) each
In the boxUnit, 5V 2.6A power supply, 3.5mm-to-DB-9 adaptor, IR emitter (sender) or IR extender (receiver), L-shaped brackets, rubber feet, quick-start guide