Gefen EXT-DVIKA-LANS-TX DVI KVM over IP Sender
The EXT-DVIKA-LANS-TX is the sender for Gefen's Gen 2.0 DVI KVM over IP system. It takes DVI video up to 1080p and 1920 x 1200 plus USB, RS-232, IR and two-way audio from a computer and streams them over a standard Gigabit LAN, up to 330 feet (100 m) per run. A local DVI output lets you watch the source at the rack.
Video, USB, RS-232, IR and audio route independently, and Gefen rates the virtual matrix at up to 39,900 senders. The unit powers from PoE (802.3af) or a 5V DC locking supply and draws 6 W at most. It needs the EXT-DVIKA-LANS-RX receiver, sold separately.
- Dimensions (W x H x D)8.4 x 1.7 x 5.9 in, 2.2 lbs
- Power5V DC or PoE (802.3af), 6 W max
- Video(1) DVI 29-pin input, (1) DVI 29-pin local output, female
- USB(1) USB Type B host port
- Audio(1) 3.5 mm line input, (1) 3.5 mm line output
| Part number | EXT-DVIKA-LANS-TX |
|---|---|
| Video | (1) DVI 29-pin input, (1) DVI 29-pin local output, female, digital only |
| USB | (1) USB Type B host port |
| Audio | (1) 3.5 mm line input, (1) 3.5 mm line output |
| Control | (1) RS-232 DB-9 female, (1) 3.5 mm IR in/ext, (1) 3.5 mm IR out |
| Network | (1) RJ-45, shielded, with |
| Power | 5V DC or PoE (802.3af), 6 W max |
| Dimensions (W x H x D) | 8.4 x 1.7 x 5.9 in (214 x 43 x 150 mm), 2.2 lbs |









