Gefen EXT-DP-4K600-1SC DisplayPort 1.2 Extender over One SC Fiber
This sender and receiver pair extends DisplayPort 1.2 at full bandwidth (21.6 Gbps) over a single SC-terminated multimode fiber, up to 660 feet (200 m). It carries uncompressed 4K DCI (4096 x 2160) at 60 Hz 4:4:4, passes HDCP 2.2, HDCP 1.4 and DPCP content, and supports DisplayPort multi-streaming and the auxiliary channel.
The optical link isolates the sender and receiver electrically, which suits medical imaging, command rooms and signage where safety and EMC rules apply. Use OM3 or OM4 (50/125 micron) multimode fiber; single-mode is not supported. The kit includes both units, two 6 ft DisplayPort cables, two power supplies with regional plugs and two USB-to-DC cables.
- Dimensions1-3/4" x 7/8" x 3-1/8" (45mm x 22mm x 79mm), 4.8 oz each
- Connectors(1) DP 20-pin female and (1) SC fiber on sender and receiver
- Maximum resolution4K DCI (4096 x 2160) at 60 Hz, 4:4:4
- Power5V DC; sender 1.75W, receiver 2.0W
- Video bandwidth21.6 Gbps (5.4 Gbps per lane, 4 lanes)
| Part number | EXT-DP-4K600-1SC |
|---|---|
| Video bandwidth | 21.6 Gbps (5.4 Gbps per lane, 4 lanes) |
| Maximum resolution | 4K DCI (4096 x 2160) at 60 Hz, 4:4:4 |
| Connectors | (1) DP 20-pin female and (1) SC fiber on sender and receiver |
| Fiber | One strand of SC-terminated OM3 or OM4 (50/125) multimode, up to 660 ft (200 m); 850 nm, 6.5 dB optical budget |
| Content protection | HDCP 2.2, HDCP 1.4, DPCP |
| Power | 5V DC; sender 1.75W, receiver 2.0W |
| Dimensions | 1-3/4" x 7/8" x 3-1/8" (45mm x 22mm x 79mm), 4.8 oz each |
| In the box | Sender, receiver, (2) 6 ft DisplayPort cables, (2) USB-to-DC cables, (2) power supplies with US/UK/EU/AU plugs, quick start guide |









