Focusrite RedNet X2P 2x2 Dante Interface with Red Evolution Mic Preamps
RedNet X2P is a two in, two out Dante endpoint with real preamps rather than a converter with a socket. Two Red Evolution microphone preamplifiers give 0 to 68 dB of gain in 1 dB steps, per-channel +48 V, a per-channel 80 Hz high-pass filter at 12 dB per octave and an Air mode that lifts 2 dB at 10 kHz while trimming 2 dB at 20 Hz.
Inputs are locking combi XLR and accept microphone, line or instrument sources, with a 2 megohm instrument impedance and a stated EIN below -130 dBu A-weighted. Outputs are two male XLRs plus a 1/4 inch headphone jack driving 32 to 600 ohms. Two etherCON connectors carry the network and PoE, so the box needs one cable; a 12 V locking DC inlet is there when the switch does not supply power.
| Channels | 2 in / 2 out Dante interface |
|---|---|
| Microphone Preamps | 2 x Red Evolution, 0 - 68 dB in 1 dB steps |
| EIN | Below -130 dBu A-weighted typical |
| Phantom Power | +48 V, independently switchable per channel |
| Filters | 80 Hz high-pass at 12 dB per octave; Air mode +2 dB at 10 kHz, -2 dB at 20 Hz |
| Inputs | 2 x locking combi XLR, mic / line / instrument (2 Mohm instrument) |
| Outputs | 2 x male XLR line, 1 x 1/4 in headphone (32 - 600 ohm) |
| Sample Rates | 44.1 / 48 / 88.2 / 96 kHz at 24-bit |
| Power | PoE IEEE 802.3af class 0 (11.0 W) or 12 V 1.2 A DC (13.32 W) |
| Manufacturer Part Number | RedNet X2P |





