Draper Access E 210" (126 x 168) 4:3 Ceiling-Recessed Electric Projection Screen (220V)

The Draper Access E is a ceiling-recessed electric projection screen: the case is installed above the ceiling line, so nothing shows in the room until the surface drops. This size gives a 210-inch diagonal, 126 x 168-inch 4:3 NTSC image. The viewing surface hangs free and is pulled flat by the weight of the fabric and its bottom dowel, which is the right trade for classrooms, boardrooms, and training rooms where the projector is throwing text and drawings.

A detachable bottom access panel lets a technician service the screen from the room instead of from above the ceiling, and quick-connect wiring means the case can go in during construction with the screen assembly added later. The housing is plenum rated for air-handling spaces and the case measures 7-3/8 inches high by 8-1/16 inches deep including the trim flange. A 220 V three-position wall switch is standard; this size is offered in Matt White XT1000E (1.0 gain), Contrast Grey XH800E (0.8 gain); Draper's LVC-IV low-voltage controller is available on either surface.