Draper Scissor Lift SLX10
The Draper SLX10 is the 10'7" model in the Scissor Lift SLX range, a ceiling-recessed projector lift for large, high-brightness projectors drawing up to 12 amps. It lowers the projector up to 10'7" below the ceiling, lifts up to 453 lbs, and retracts to a 14 1/8" height when stored. Three sets of scissors keep the platform steady side to side and front to back, which matters when a heavy projector has to hold a converged image.
Two custom show positions can be set in addition to full up and down, and every preset survives a power outage. An extended travel position brings the projector within reach for lamp and filter service. A UL Listed receptacle powers the projector at 115V or 240V, RS232 and RS485 control are built in with optional RF and IR, and a wall and service key switch are included. The lift is finished in white (standard) or black and weighs 133 lbs.
- Footprint (WxD)39 1/2" x 39 1/2" (35" x 35" max projector)
- Lift Capacity453 lbs
- Power115V or 240V, UL Listed receptacle outlet
- Net Weight133 lbs
- Shipping Weight343 lbs
| Max Lowering Distance | 10'7" |
|---|---|
| Retracted Height | 14 1/8" |
| Lift Capacity | 453 lbs |
| Projector Current | Up to 12 amps |
| Power | 115V or 240V, UL Listed receptacle outlet |
| Control | RS232 and RS485 built in; optional RF and IR |
| Footprint (WxD) | 39 1/2" x 39 1/2" (35" x 35" max projector) |
| Net Weight | 133 lbs |
| Shipping Weight | 343 lbs |
| Draper Part Number | 300250 (110V) |









