Contemporary Research ATSC-SDI 4i HDTV Tuner with SDI and HDMI
The ATSC-SDI 4i is the third-generation ATSC-SDI tuner. It receives MPEG-2 and H.264 digital channels and analog channels in ATSC, clear QAM and NTSC, over the air or from cable, with internal scaling and closed captioning, and delivers video up to 1080p on SDI and HDMI. The tuned channel can also leave the Ethernet port as an IPTV stream. Control commands match the earlier ATSC-SDI models.
It is controlled over 2-way RS-232, Telnet and UDP, and wired or wireless IR, with an onboard web page and a menu-driven front display for setup. An optional RF-AB switch changes between antenna and cable. CR Toolbox finds the tuners on the network for setup and firmware updates. It ships with a PS12-1.5 power supply and the universal rack mount kit.
- Dimensions (W x H x D)8.5 x 1.75 x 8 in
- TypeAV Tuners
- RF DecodingMPEG2, H.264 - 480i, 480p, 720p, 1080i, 1080p; Dolby Audio
- Video OutSDI Output – SD/HD/3G Level A; HDMI receptacle, Type A
- In the BoxPS12-1.5 Power Supply, Universal Rack Mount Kit
| Part Number | 5111-001 |
|---|---|
| Model | ATSC- 4i |
| Type | AV Tuners |
| Dimensions (W x H x D) | 8.5 x 1.75 x 8 in |
| Tuning | Air/Cable Input ‘F’, female, 75 ohm impedance, -10 to 25 dBmV typical; Off-Air 2-69 (8-VSB and NTSC) and CATV 1-135 (64QAM, 256QAM, 8-VSB, NTSC) Standard, HRC, and IRC Parental option for channels and/or rating |
| IPTV Out | Pass-through UDP MPEG-TS IPTV stream from received channel, all programs or single program |
| RF Decoding | MPEG2, H.264 - 480i, 480p, 720p, 1080i, 1080p; Dolby Audio, MPEG-1 Layer 2, AAC |
| Video Out | SDI Output – SD/HD/3G Level A; receptacle, Type A, Version 1.3 (1080p/1080i/720p/480i) |
| Audio Out | SDI and HDMI, Dolby Audio/PCM/PCM variable level; S/PDIF Coax and optical output, Dolby Audio/PCM/PCM variable level; Analog Stereo RCA variable level |
| Control | RJ-45 10/100 Ethernet for Web page access, Telnet and UDP control, IPTV Output; DB9 male RS-232 1200 to 230K baud, 8 data bits, no parity, 1 stop bit; IR Input 3.5 mm TRS jack for optional IR-RXC IR Receiver; A/C 3.5 mm control output for optional RF-AB Air/Cable Selector Switch |
| Front Panel | LCD Text display, white text on blue background; Power, Menu, Setup, and Select buttons; Up and Down (Channel Up and Down) buttons; Left and Right (Volume Up and Down) buttons; IR Sensor, Mini USB-B port |
| Power In | 2.1 mm coaxial jack (inside center conductor positive), 1.1 A maximum, 11 to 14 VDC, 12 VDC typical, 13.2 W 45 BTU, 15.2 W 52 BTU including power supply, current draw 0.198 A@114 VAC with power supply |
| In the Box | PS12-1.5 Power Supply, Universal Rack Mount Kit |
| Optional | HD3-RC IR Remote, IR-RXC External IR Receiver |
| Warranty | 3 years standard; 5 years with the extended warranty |
| Brand | Contemporary Research |












