Contemporary Research QIP-DVX IPTV Decoder/Controller
The QIP-DVX decodes MPEG-2 and H.264 IPTV streams, unicast or multicast UDP and RTP, single or multiple program, and outputs HDMI from 480i up to 4K. Its channel list loads from CR Toolbox, and channel, volume and power can be run from the front panel, the IR remote or an external control system.
Commands from a Contemporary Research Display Control Center or Display Express go out to the screen over RS-232, IR or CEC, translated to that display's protocol. Optical S/PDIF and USB inputs sense power for IR-controlled sets. It runs on PoE (6 W) or 11 to 14 VDC. Please give the display make and model with the order. Power supply, IR receiver, remote, IR emitter and power sensor cable are optional.
| Part Number | 5116-001 |
|---|---|
| Model | QIP-DVX |
| Type | IPTV Decoders, TV and Display Control |
| Dimensions (W x H x D) | 7.25 x 1.15 x 3.6 in |
| Physical | Size (HWD): 7.25” [184mm] wide (7.85” [200mm] including wings) x 1.150” [29mm] height x 3.6” [91mm] deep; Weight: 13 oz [369 g]; Enclosure: Aluminum with black powder coat paint Mounting: Hook-and-loop fasteners or screw attachment Power: , 6W or 11 to 14 VDC at 0.5A max |
| Decoding | Accepts UDP and RTP Ethernet streams; Decodes MPEG-2 or H.264 IPTV streams with MP1/2 or AAC audio; Supports single program or multiple program transport streams; Supports multiple audio programs; On board closed caption decoder supports EIA-608 and EIA-708 embedded closed captions |
| Front Panel | IR: IR Sensor; Status: Red/green status LED; Control: Five button control |
| Back Panel | Service: USB-A port (internal use); : Type A, 4K/HD video and digital audio; S/PDIF: Optical digital audio output; Audio: 3.5 mm stereo jack; RS-232: 3.5 mm TRS jack for display control (T – Tx R – Rx S – GND); IR Out: 3.5 mm TRS jack for display control (T – Signal R – N/C S – GND); Ethernet: RJ-45 connector, 100 Mbps, PoE; I/O: 3.5 mm TRS jack (T – I/O1 R – I/O2 S – GND); Optional USB Power Sensor Cable; IR In: 3.5 mm TRS jack for optional external IR receiver or wired IR (T – +5V R – Signal S – GND); 12 VDC: Optional power input; 2.1 mm coaxial jack (inside center conductor positive), 0.5 A max |
| Optional | CC-IR IR Emitter Cabe; CC-232 RS-232 Cable; CC-USB USB Power Sensor Cable; IR-RXD External IR Receiver; HD2-RC IR Remote; PS12 1.0 Power Supply 1A |
| Optional | PS12-1.0 Power Supply, IR-RXD External IR Receiver, HD3-RC IR Remote Control, CC-IRE IR Emitter, and CC-USB Power Sensor Cable |
| Warranty | 3 years standard; 5 years with the extended warranty |
| Brand | Contemporary Research |













