CNDLive D1 4K HDMI and 3G-SDI IP Video Decoder
The D1 turns network video back into baseband: it decodes NDI High Bandwidth, NDI HX2/HX3, SRT, RTMP, RTMPS, HLS, TS over UDP and RTSP, and can act as an RTMP server that encoders push to directly. HDMI 2.0 outputs up to 3840x2160p60 and 3G-SDI up to 1080p60, with 8 channels of embedded audio and a 3.5 mm line out.
Interlaced and B-frame sources decode on the unit, and four channels can be previewed. Two Gigabit Ethernet ports (one PoE), USB-A 3.0 and USB-C sit beside a 2-inch status LCD with buttons; the web page and CNDLive Manager cover remote setup. Power is PoE or 12 V DC, under 9 W. It measures 5.51 x 5.17 x 1.72 in and weighs 15.6 oz.
- Dimensions140 x 131.2 x 43.7 mm (5.51 x 5.17 x 1.72 in)
- Output resolutionsHDMI up to 3840x2160p60; SDI up to 1080p60
- Audio port1x 3.5 mm line out
- PowerDC 12 V / 2 A or PoE; 9 W max
- Weight443 g (15.63 oz)
| Part number | CND-D1 |
|---|---|
| UPC | 774882279549 |
| Video outputs | 1x 3G- (SMPTE 424M, HD-SDI, SD-SDI); 1x 2.0 |
| Output resolutions | HDMI up to 3840x2160p60; SDI up to 1080p60 |
| Decoding protocols | High Bandwidth, NDI HX2/HX3; SRT, RTMP, RTMPS, RTMP server; HLS, TS over UDP, RTSP |
| Audio decoding | AAC, MP3, MP2, MPA, G.711, Opus, LPCM; 8 channels on SDI/HDMI |
| Audio port | 1x 3.5 mm line out |
| Network | 2x 100/1000 RJ45 (one with ) |
| Other ports | 1x USB-A 3.0, 1x USB-C |
| Display | 2.0-inch LCD with buttons |
| Management | Web page; CNDLive Manager |
| Power | DC 12 V / 2 A or PoE; 9 W max |
| Dimensions | 140 x 131.2 x 43.7 mm (5.51 x 5.17 x 1.72 in) |
| Weight | 443 g (15.63 oz) |
| Operating temperature | -10 to 45 C |



