CNDLive logo
Shop All CNDLive

CNDLive NDI Go 4K NDI to HDMI Decoder

NDI Go is a small NDI decoder for putting an NDI source on a display or into a recorder: it decodes NDI High Bandwidth, NDI HX2 and NDI HX3 up to 3840x2160p60 and outputs over HDMI 2.0. An indicator shows working and decoding status.

One Gigabit Ethernet port carries both the stream and PoE power, or use the 12 V DC input. Audio goes out the 3.5 mm line out. The USB 3.0 Type-A port connects intercom audio through CNDLive Manager, and the unit supports PTZ control over IP. It measures 100 x 100 x 25 mm and runs from -20 to 60 C.

  • Dimensions100 x 100 x 25 mm
  • Output1x HDMI 2.0, up to 3840x2160 at 60 Hz
  • Audio output3.5 mm line out
  • PowerDC 12 V / 2 A or PoE
  • DecodingNDI High Bandwidth, NDI HX2/HX3, up to 4Kp60
Part numberCND-NDIGO
UPC774882279624
Output1x 2.0, up to 3840x2160 at 60 Hz
Decoding High Bandwidth, NDI HX2/HX3, up to 4Kp60
Network1x 1000 Mbps RJ45 with
Audio output3.5 mm line out
USB1x USB 3.0 Type-A for audio intercom
IndicatorWorking and decoding status
PowerDC 12 V / 2 A or PoE
Operating temperature-20 to 60 C
Dimensions100 x 100 x 25 mm