Canon RC-IP300 PTZ Controller
The Canon RC-IP300 is a desk controller for Canon PTZ cameras and remote-capable Cinema EOS and XF camcorders. A joystick lever, zoom rocker and focus dial handle the moves, and the 3.5-inch 1280 x 720 touch screen previews up to 9 IP cameras per page with touch focus, waveform and vectorscope.
It addresses up to 200 cameras over IP (one over serial) in 20 groups, stores 100 presets and 10 traces per camera, and runs Canon's RA-AT001 Auto Tracking and RA-AL001 Auto Loop add-ons. PoE (802.3af) or the included 12 V adapter powers it, and Stream Deck units plug in for extra buttons. A GPIO port handles external control links.
- DimensionsApprox. 10.04 x 3.7 x 7.09 in.
- Connectable Cameras200 (1 with serial connection)
- WeightApprox. 3.09 lbs
- Supported CamerasCR-N700, CR-N500, CR-N400, CR-N350, CR-N300, CR-N100
- Presets / TracesUp to 100 presets and 10 traces per camera
| Supported Cameras | CR-N700, CR-N500, CR-N400, CR-N350, CR-N300, CR-N100, CR-X500, CR-X300, XF605, EOS C300 and others |
|---|---|
| Connectable Cameras | 200 (1 with serial connection) |
| Protocols | XC protocol (IP), NU protocol (serial), Standard (serial) |
| Presets / Traces | Up to 100 presets and 10 traces per camera |
| Display | 3.5-inch touch panel, 1280 x 720 |
| Terminals | LAN/+ RJ45, RS-422 RJ45, GPIO D-Sub 9-pin, 12V DC |
| Dimensions | Approx. 10.04 x 3.7 x 7.09 in. (255 x 94 x 180 mm) |
| Weight | Approx. 3.09 lbs (1.4 kg) |
| Part Number | 7657C002 |

- RC-IP300 Main Unit
- AC Adapter
- AC Cable (US)
- Printed Material






