BirdDog Wallplate Dual Output NDI Decoder (BDWPOUT)
The Wallplate Dual Output is an NDI decoder built into a wall plate, for the meeting room or boardroom where the integrator wants the screens fed from the network and nothing visible but a faceplate. It carries two independent HDMI 1.4a outputs, so two displays on the same wall can show different NDI sources, and it runs on PoE, so one Ethernet cable delivers power and video. A 3.5 mm analogue jack sits beside the two-channel 24-bit embedded HDMI audio.
BirdDog's custom NDI silicon decodes full-bandwidth NDI at 1080p up to 59.94 with line-based processing for low latency. Faceplates are interchangeable and carry soft-glow status indicators; setup is through a web console and the whole thing is automatable through a RESTful API, which suits room-control systems. BirdDog declared the Wallplate range end of life on 26 March 2026; listed for reference and existing installs.
| Type | Wall-plate decoder, dual output |
|---|---|
| Video Outputs | 2 x Type A, HDMI v1.4a, independent |
| Video Formats | 1080p 23.98 / 25 / 29.97 / 50 / 59.94; 720p 50 / 59.94 |
| NDI | Full-bandwidth NDI (i-frame), realtime, low latency |
| Audio | 2-channel 24-bit embedded HDMI audio, 48 kHz; 3.5 mm analogue |
| Network | 10/100/1000 Ethernet (RJ-45) |
| Power | 802.3af/at |
| Control | Web management console, RESTful API |
| Faceplate | Interchangeable, soft-glow status indicators |
| Status | End of Life as of 26 March 2026 (birddog.tv) |


