Black Box ACR1002A-R ServSwitch Agility KVM-over-IP Receiver - Dual-Head Dual-Link DVI-D, USB 2.0
This is the receiver: the box at the user's desk that pulls dual-head or dual-link DVI-D video to 2560 x 1600, USB, USB 2.0 and audio off the LAN and turns it back into a working console. Signals travel up to 330 feet (100 m), or further with network switches in the path, and no-loss compression keeps the picture pixel-accurate while holding bandwidth down.
Changing channel on the receiver switches video, audio and USB as a unit, so one console can move between transmitters as if it were a matrix switch - and the transmitters it leaves behind carry on emulating the peripherals, so the target machines never notice. The Agility Controller configures transmitters and receivers securely from a web browser. Point-to-point extension, multicast HD video and single-target sharing all use the same hardware.
| Role | Receiver (dual-head or dual-link) |
|---|---|
| Video | Dual-head or dual-link DVI-D, maximum 2560 x 1600, no-loss compression |
| Network | Ethernet LAN, up to 330 ft (100 m), further with network switches |
| USB | USB HID and USB 2.0 |
| Audio and serial | Supported |
| Management | Agility Controller for secure browser-based configuration |
| Topologies | Point-to-point extension, matrix switching, multicast, single-target sharing |
| Ships with | Receiver, 5 VDC power supply, 6-ft US power cord, (4) rubber feet, safety sheet |





