ATTO XstreamCORE ET 8200 40GbE to 16-Lane 12Gb SAS Bridge, Disk and Tape
XstreamCORE ET 8200 connects two 40GbE ports, with QSFP+ modules included, to four x4 12Gb mini-SAS HD (SFF-8644) connectors. It integrates up to 960 SAS/SATA SSDs, HDDs or optical drives per bridge, plus SAS tape drives and libraries. Using iSER it reaches up to 1.1M 4K IOPS or 6GB/s per bridge while adding under two microseconds of latency.
The xCORE acceleration processor handles reads and writes in hardware, and the eCORE control engine adds shared services such as multi-initiator access, reservations and data mover. ATTO SpeedWrite improves SAS tape write performance by up to 20%, and XstreamVIEW, Redfish and Swordfish handle management.
- DimensionsHeight 1.735 in, length 9.90 in, width 17.31 in
- Ethernet ports(2) 40Gb Ethernet, optical (QSFP+ modules included)
- SAS ports(4) 12Gb HD mini-SAS (x4) (SFF-8644)
- Power64W typ, 69W max; input 100-240 VAC, 1.0A, 50-60 Hz
- Weight9.7 lb unboxed, 12.9 lb boxed
| Part number | XCET-8200-002 |
|---|---|
| Model number | XCET-8200-002 |
| Ethernet ports | (2) 40Gb Ethernet, optical (QSFP+ modules included) |
| Auto-negotiation | 40Gb/10Gb |
| SAS ports | (4) 12Gb HD mini-SAS (x4) (SFF-8644) |
| SAS speeds | Auto negotiates to 12Gb/6Gb/3Gb |
| Supported devices | Up to 960 SAS/SATA disks per bridge; tape and optical drives |
| Latency | < 2 microseconds |
| Performance | Up to 1.1M 4K IOPS or 6GB/s with iSER per bridge |
| Power | 64W typ, 69W max; input 100-240 VAC, 1.0A, 50-60 Hz |
| Dimensions | Height 1.735 in, length 9.90 in, width 17.31 in |
| Weight | 9.7 lb unboxed, 12.9 lb boxed |
| Form factor | 1U rackmount |

- ATTO XstreamCORE 8200 intelligent Bridge
- QSFP+ module(s)
- RJ45 cable
- Power cord
- Small rack mounting kit









