Shop All ATTO
ATTO XstreamCORE FC 7600 32Gb Fibre Channel to 16-Lane 12Gb SAS Bridge, 1U
XstreamCORE FC 7600 connects two 32Gb Fibre Channel SFP+ ports, optical modules included, to four x4 12Gb mini-SAS HD connectors. It supports up to 960 SAS/SATA drives per controller and up to 16 SAS tape drives, reaches 1.1M 4K IOPS and 6GB/s, adds under four microseconds of latency, and accepts up to 64 initiators.
The Fibre Channel ports auto-negotiate to 16Gb and 8Gb. Two hot-swap power supplies, a web-based XstreamVIEW manager, Drive MapDirector host mapping and ATTO Data Mover are built in.
- DimensionsHeight 1.735 in, length 9.90 in, width 17.31 in
- Input connectors(2) 32Gb Fibre Channel (SFP+)
- Output connectors(4) 12Gb mini-SAS HD (x4)
- Power input85-264 VAC, 0.5A, 47-63 Hz
- Power suppliesTwo, hot swap
| Part number | XCFC-7600-002 |
|---|---|
| Product SKU | XCFC-7600-002 |
| Input connectors | (2) 32Gb Fibre Channel (SFP+) |
| Output connectors | (4) 12Gb mini-SAS HD (x4) |
| FC auto-negotiation | 16Gb/8Gb |
| Architecture latency | < 4 microseconds |
| Max 4K IOPS | 1,100,000 |
| Max throughput | 6GB/s |
| Initiators | Up to 64 supported |
| SAS/SATA drives | Up to 960 per controller |
| Tape drive support | Up to 16 SAS drives |
| Power supplies | Two, hot swap |
| Power input | 85-264 VAC, 0.5A, 47-63 Hz |
| Dimensions | Height 1.735 in, length 9.90 in, width 17.31 in |
| Weight | 9.7 lb unboxed, 12.9 lb boxed |
| Form factor | 1U rackmount |

- ATTO XstreamCORE 7600 intelligent Bridge
- LC SFP+ module(s)
- RJ45 cable
- Power cord
- Small rack mounting kit









