Ashly AQM1208 Mixer
The AQM1208 is a 1U, 12-input by 8-output zone mixer and matrix processor that sits ahead of external amplifiers. Its 12 balanced mic/line inputs have Class A preamps with switchable phantom power, and four RCA line inputs sum onto channels 9-12 for background-music players. Typical jobs are mic mixing in meeting rooms, music distribution across several zones, and noise masking.
Setup and control run through AquaControl, a web interface served by the unit itself, so any browser on the network can reach it with nothing to install, on site or remotely over Ethernet. A built-in scheduler with a real-time clock can change settings by time of day. The DSP covers compression, limiting, gating, parametric EQ, crossovers, delay, auto-mixing and ambient noise control. Wall controls and building systems tie in through 8 GPI inputs, 2 GPO outputs and 8 remote VCA ports.
- Dimensions19 x 1.75 x 8.5 in W x H x D, 1U
- Outputs8 balanced line
- ConnectorsEuroblock 3.5mm (inputs and balanced outputs)
- Input Impedance3k Ohm (mic/line), 10k Ohm (RCA)
- Maximum Output Level+21dBu
| Model | AQM1208 |
|---|---|
| Inputs | 12 balanced mic/line + 4 unbalanced RCA (summed on channels 9-12) |
| Outputs | 8 balanced line |
| Connectors | Euroblock 3.5mm (inputs and balanced outputs) |
| 21V, 10.8mA per channel, switchable | |
| Frequency Response | 20Hz-20kHz, +/-0.25dB |
| THD+N | <0.01% @ 1kHz, +20dBu |
| Signal-to-Noise Ratio | >110dB (20Hz-20kHz) unweighted |
| Mic Preamp EIN | -126dB |
| Input Impedance | 3k Ohm (mic/line), 10k Ohm (RCA) |
| Resolution / Sample Rate | 32-bit / 48kHz |
| Propagation Delay | 1.08ms |
| Maximum Output Level | +21dBu |
| Network | RJ-45, 1GB Ethernet |
| Control I/O | 8 GPI, 2 GPO, 8 VCA ports |
| Power | 90-240VAC, 50/60Hz |
| Dimensions | 19 x 1.75 x 8.5 in (483 x 45 x 216 mm) W x H x D, 1U |
| Weight | 6.2 lbs (2.8kg) |
| Ashly SKU | AQM1208-120V-U |



