Ashly AQM408 Speaker Processor
The AQM408 is a 1U speaker processor and zone mixer with 4 balanced line inputs and 8 balanced line outputs on XLR, built to drive external amplifiers. The processing is aimed at loudspeaker work: 2, 3 and 4-way crossovers, FIR filters, speaker delay, a 31-band graphic EQ with feedback suppression, and 10-band parametric EQ with high- and low-pass filters. Use it to tune a set of loudspeakers or to split a few sources across up to eight zones.
Setup and control run through AquaControl, a web interface served by the unit itself, so any browser on the network can reach it with nothing to install, on site or remotely over Ethernet. A built-in scheduler with a real-time clock can change settings by time of day. Dynamics include compressor, leveler, limiter and gate, with a multi-priority ducking matrix, auto-mixing and ambient noise control. Remote control comes in over 2 GPI triggers and 3 remote VC ports on 3.5mm Euroblock.
- Dimensions19 x 1.75 x 8.5 in W x H x D, 1U
- Inputs4 balanced line (XLR)
- Outputs8 balanced line (XLR)
- Input Impedance10k Ohms
- Maximum Output Level+20.5 dBu
| Model | AQM408 |
|---|---|
| Inputs | 4 balanced line () |
| Outputs | 8 balanced line (XLR) |
| Input Impedance | 10k Ohms |
| Maximum Output Level | +20.5 dBu |
| Frequency Response | 20Hz-20kHz, +/-0.25dB |
| THD+N | <0.01% @ 1kHz, 0dBu |
| Signal-to-Noise Ratio | >110dB (20Hz-20kHz) unweighted |
| Resolution / Sample Rate | 32-bit / 48kHz |
| Propagation Delay | 1.08 ms |
| Network | RJ-45, 1GB Ethernet |
| Remote Control | 2 GPI triggers; 3 remote VC ports (Euroblock 3.5mm) |
| Power | 90-240VAC, 50/60Hz |
| Dimensions | 19 x 1.75 x 8.5 in (483 x 45 x 216 mm) W x H x D, 1U |
| Weight | 6.2 lbs (2.8 kg) |
| Ashly SKU | AQM408-120V-U |


