Adder logo
Shop All Adder

Adder RED-PSU PRO1-16 16-Port 12VDC Rack Power Distribution Unit, US

The ADDER RED-PSU PRO1-16 is a 1U, 19-inch rack mount unit with 16 separate 12VDC outputs on locking 3-pin connectors. Each output is limited to 30W (12V 2.5A) and is protected against excess demand; at start up the outputs switch on in sequence to reduce the load on the power module.

Power comes from one 495W plug-in module at the rear; the chassis has a second bay, and adding a PSU-REDPRO-495W module gives redundancy. A web interface on the built-in 10/100 Ethernet port shows temperature, fan speeds and current per output and switches each output on or off, secured by HTTP digest authentication; a REST API is available. Adder devices that run on 5V connect through the optional PSU-RPS-5V-3M converter dongle.

  • Size1U, 435 x 44 x 275 mm / 17.1 x 1.7 x 10.8 in
  • Outputs16 x locking 3-pin DC jack, 12V 2.5A (30W) limit each
  • Power modules1 x 495W
  • Maximum power495 W
  • Weight4.5 kg / 9.9 lb
Part numberPSU-REDPRO1-16-US
Ordering codePSU-REDPRO1-16-US
Outputs16 x locking 3-pin DC jack, 12V 2.5A (30W) limit each
Power modules1 x 495W
Input1x IEC 90-264VAC 47/63Hz. Efficiency 94% @50% load. Power Factor 0.9 MIN typical
Maximum power495 W
Network1x 8p8c (RJ45), 10/100MbE
MTBF600,000 h (Telcordia SR332 Issue 4, calculated at 55C)
Operating temperature0 to 50 °C / 32 to 122 °F
Size1U, 435 x 44 x 275 mm / 17.1 x 1.7 x 10.8 in
Weight4.5 kg / 9.9 lb
ApprovalsCE, cULus - E476334, FCC, RCM, UKCA
3items in the box
  • 1x RED-PSU PRO1-16
  • 1x Country specific power cable
  • 1x Quick start guide