Adder RED-PSU PRO2-16 16-Port 12VDC Rack Power Distribution Unit, Redundant, US
The ADDER RED-PSU PRO2-16 is a 1U, 19-inch rack mount unit with 16 separate 12VDC outputs on locking 3-pin connectors. Each output is limited to 30W (12V 2.5A) and is protected against excess demand; at start up the outputs switch on in sequence to reduce the load on the power modules.
Two 495W power modules slot into the rear and share the load; if one stops, the full load moves to the other at once, and either can be swapped while the unit runs. A web interface on the built-in 10/100 Ethernet port shows temperature, fan speeds and current per output and switches each output on or off, secured by HTTP digest authentication; a REST API is available. Adder devices that run on 5V connect through the optional PSU-RPS-5V-3M converter dongle.
- Size1U, 435 x 44 x 275 mm / 17.1 x 1.7 x 10.8 in
- Outputs16 x locking 3-pin DC jack, 12V 2.5A (30W) limit each
- Power modules2 x 495W, hot-swappable, load balanced
- Maximum power990 W
- Weight4.5 kg / 9.9 lb
| Part number | PSU-REDPRO2-16-US |
|---|---|
| Ordering code | PSU-REDPRO2-16-US |
| Outputs | 16 x locking 3-pin DC jack, 12V 2.5A (30W) limit each |
| Power modules | 2 x 495W, hot-swappable, load balanced |
| Input | 2x IEC 90-264VAC 47/63Hz. Efficiency 94% @50% load. Power Factor 0.9 MIN typical |
| Maximum power | 990 W |
| Network | 1x 8p8c (RJ45), 10/100MbE |
| MTBF | 600,000 h (Telcordia SR332 Issue 4, calculated at 55C) |
| Operating temperature | 0 to 50 °C / 32 to 122 °F |
| Size | 1U, 435 x 44 x 275 mm / 17.1 x 1.7 x 10.8 in |
| Weight | 4.5 kg / 9.9 lb |
| Approvals | CE, cULus - E476334, FCC, RCM, UKCA |

- 1x RED-PSU PRO2-16
- 2x Country specific power cable
- 1x Quick start guide









