Yamaha Concert Club V Stage Monitor
CM wedges are the Concert Club V monitors, the cabinets a house of worship or a school auditorium leaves on the stage deck permanently. Each is a two-way bass-reflex passive box at 8 ohms nominal, cut at a floor-monitor angle and matched in voicing to the C-series full-range cabinets so the same amp rack and the same EQ approach carries across the system.
The CM10V pairs a 10-inch cone with a 1-inch voice-coil driver and handles 250 W program, the CM12V uses a 12-inch cone and a 2-inch driver at 350 W, and the CM15V puts a 15-inch cone behind the 2-inch driver for 500 W program and 99 dB sensitivity. All three wire through two 1/4-inch phone jacks and two Neutrik Speakon NL4MP connectors in parallel, so a monitor line can be looped from wedge to wedge across the stage.
| Type | 2-way passive stage monitor, bass-reflex |
|---|---|
| LF Driver | CM10V 10" / CM12V 12" / CM15V 15" cone |
| HF Driver | CM10V 1" / CM12V and CM15V 2" voice-coil compression driver |
| Frequency Response | CM10V 70 Hz - 20 kHz / CM12V 60 Hz - 16 kHz / CM15V 55 Hz - 16 kHz |
| Nominal Impedance | 8 ohms |
| Power Capacity (Program) | CM10V 250 W / CM12V 350 W / CM15V 500 W |
| Sensitivity | CM10V 96 dB / CM12V 97 dB / CM15V 99 dB SPL (1 W, 1 m) |
| Input Connectors | 2x 1/4" phone jack, 2x Neutrik Speakon NL4MP |
| Net Weight | CM10V 13.3 kg / CM12V 21.8 kg / CM15V 28.8 kg |









