Tannoy 0301-ABI86-000 CMS 403ICTE Ceiling Loudspeaker
The CMS 403ICTE is a wide-bandwidth ceiling loudspeaker from Tannoy's third-generation CMS 3.0 range, rated 40 W continuous and 160 W peak. Its 4-inch ICT (Inductive Coupling Technology) point-source driver extends the frequency range and keeps coverage consistent, and Tannoy builds ICT drivers for long-term reliability in spaces where the system runs all day. Inside its fixed ceiling ring the speaker tilts toward the listener, which helps when it cannot be placed where the room needs it, and it has an integral ABS back can.
A self-aligning 3-way clamp system makes installation quick. A low-insertion-loss 30 W transformer with a front-panel tap switch covers 70 V and 100 V lines, or set it to 16 ohms for direct drive. Wiring lands on a removable locking screw-terminal connector with loop-through. The paintable powder-coated steel mesh grille has dust protection, two tile support rails and a C-ring come in the box, and a plaster (mud) ring is optional. Finished in semi-matt white, it is optimised for LAB GRUPPEN LUCIA amplifiers, which run up to eight CMS speakers per channel.
| Frequency Response (-3 dB) | 110 Hz - 22 kHz |
|---|---|
| System Sensitivity (1 W @ 1 m) | 88 dB (1 W = 4 V for 16 Ohms) |
| Coverage Angle | 90 degrees conical (120 degrees, 1 kHz to 6 kHz) |
| Power Handling | 40 W average, 160 W peak |
| Nominal Impedance (Lo Z) | 16 Ohms |
| Rated Maximum SPL | 104 dB average, 110 dB peak |
| Transformer Taps 70 V | 30 W / 15 W / 7.5 W / 3.75 W / OFF & low impedance |
| Transformer Taps 100 V | 30 W / 15 W / 7.5 W / OFF & low impedance |
| Crossover | 7 kHz inductively coupled |
| Transducer | 100 mm (4.00 in) mineral loaded polypropylene LF, 19 mm (0.75 in) ICT aluminium dome HF |
| Hole Cutout Diameter | 187 mm (7.36 in) |
| Net Weight (ea) | 3.0 kg (6.61 lbs) |
| Compliance | UL-1480, UL-2043, CE |
| Included | C-Ring, tile-bridge kit, paint mask, cut-out template, grille |
| Model_Code | 0301-ABI |
| Features | Full range ceiling loudspeaker for installation applications; 40 Watts continuous, 160 Watts peak power; 4" ICT (Inductive Coupling Technology) point source driver for extended frequency range; Blind Mount enclosure supplied with integral moulded ABS back can; Integrated single unit construction for ease of installation; Adjustable tilt angle with 360° rotation to accommodate difficult loudspeaker placements; High durability design for constant heavy usage in demanding applications; Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input; Low insertion loss 30 W line transformer with easily accessible tapping switch; Optimised for Lab Gruppen low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel; Semi matt white finish fits unobtrusively in any environment; Powder coated UV resistant perforated steel mesh grille with dust protection; Removable grille for custom painting; Self-aligning 3 way clamp mounting system; Mounting C-ring and ceiling tile rails included |
| Mt_Sku | 0301-ABI86-000 |
