Tannoy logo
Shop All Tannoy

Tannoy 0301-ABD86-000 CMS 603ICT LS Ceiling Loudspeaker

The CMS 603ICT LS is a wide-bandwidth ceiling loudspeaker from Tannoy's third-generation CMS 3.0 range, rated 60 W continuous and 240 W peak. Its 6-inch ICT (Inductive Coupling Technology) point-source driver extends the frequency range and keeps coverage consistent, and Tannoy builds ICT drivers for long-term reliability in spaces where the system runs all day. The LS version is UL 1480 UUMW certified for life safety applications and UL certified for use with non-DC supervised systems, with an acoustically enhanced zinc-plated steel back can fitted.

A self-aligning 4-way clamp system makes installation quick. A low-insertion-loss 60 W transformer with a front-panel tap switch covers 70 V and 100 V lines, or set it to 16 ohms for direct drive. Wiring lands on a removable locking screw-terminal connector with loop-through. The paintable powder-coated steel mesh grille has dust protection, two tile support rails and a C-ring come in the box, and an Arco grille that hides the whole unit and a plaster (mud) ring are optional. Finished in semi-matt white, it is optimised for LAB GRUPPEN LUCIA amplifiers, which run up to eight CMS speakers per channel.

Frequency Response (-3 dB)78 Hz - 22 kHz
System Sensitivity (1 W @ 1 m)91 dB (1 W = 4 V for 16 Ohms)
Coverage Angle90 degrees conical (92 degrees, 1 kHz to 6 kHz)
Power Handling60 W average, 120 W programme, 240 W peak
Nominal Impedance (Lo Z)16 Ohms
Rated Maximum SPL109 dB average, 115 dB peak
Transformer Taps 70 V60 W / 30 W / 15 W / 7.5 W / OFF & low impedance
Transformer Taps 100 V60 W / 30 W / 15 W / OFF & low impedance
Crossover7 kHz inductively coupled
Transducer165 mm (6.50 in) mineral loaded polypropylene LF, ICT aluminium dome HF
Hole Cutout Diameter253 mm (9.96 in)
ComplianceUL 1480 UUMW (Life Safety), UL-2043, CE
IncludedC-Ring, tile-bridge kit, paint mask, cut-out template, grille
Model_Code0301-ABD
FeaturesFull range ceiling loudspeaker for installation applications; 60 Watts continuous, 240 Watts peak power; 6" ICT (Inductive Coupling Technology) point source driver for extended frequency range; Blind Mount version supplied with acoustically enhanced zinc plated steel back can; Integrated single unit construction for ease of installation; High durability design for constant heavy usage in demanding applications; UL 1480 UUMW certified for life safety applications; UL 2043 certified for air-handling spaces; Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input; Low insertion loss 60 W line transformer with easily accessible tapping switch; Optimised for Lab Gruppen low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel; Semi matt white finish fits unobtrusively in any environment; Powder coated UV resistant perforated steel mesh grille with dust protection; Removable magnetic grille for custom painting; Optional ARCO designer grilles available for minimal architectural impact; Self-aligning 4 way clamp mounting system; Mounting C-ring and ceiling tile rails included
Mt_Sku0301-ABD86-000