Tannoy logo
Shop All Tannoy

Tannoy 0301-ABC86-000 CMS 603ICT PI Ceiling Loudspeaker

The CMS 603ICT PI is a wide-bandwidth ceiling loudspeaker from Tannoy's third-generation CMS 3.0 range, rated 60 W continuous and 240 W peak. Its 6-inch ICT (Inductive Coupling Technology) point-source driver extends the frequency range and keeps coverage consistent, and Tannoy builds ICT drivers for long-term reliability in spaces where the system runs all day. This Pre-Install version ships without a back can, so the can goes in first and the speaker later; its clamps reach further for thicker ceiling panels and lock to prevent over-tightening.

A self-aligning 4-way clamp system makes installation quick. The front-panel tap switch controls a 60 W transformer housed in the optional PI back can; without it the speaker runs at 16 ohms direct. Wiring lands on a removable locking screw-terminal connector with loop-through. The paintable powder-coated steel mesh grille has dust protection, two tile support rails and a C-ring come in the box, and an Arco grille that hides the whole unit and a plaster (mud) ring are optional. Finished in semi-matt white, it is optimised for LAB GRUPPEN LUCIA amplifiers, which run up to eight CMS speakers per channel.

Frequency Response (-3 dB)78 Hz - 22 kHz (BM backcan)
System Sensitivity (1 W @ 1 m)91 dB (1 W = 4 V for 16 Ohms)
Coverage Angle90 degrees conical (92 degrees, 1 kHz to 6 kHz)
Power Handling60 W average, 120 W programme, 240 W peak
Nominal Impedance (Lo Z)16 Ohms
Rated Maximum SPL109 dB average, 115 dB peak
Transformer Taps 70 V60 W / 30 W / 15 W / 7.5 W / OFF & low impedance
Transformer Taps 100 V60 W / 30 W / 15 W / OFF & low impedance
Crossover7 kHz inductively coupled
Transducer165 mm (6.50 in) mineral loaded polypropylene LF, ICT aluminium dome HF
Hole Cutout Diameter253 mm (9.96 in)
Net Weight (ea)2.7 kg (5.95 lbs)
ComplianceUL-1480, UL-2043, CE
IncludedC-Ring, tile-bridge kit, paint mask, cut-out template, grille
Model_Code0301-ABC
FeaturesFull range ceiling loudspeaker for installation applications; 60 Watts continuous, 240 Watts peak power; 6" ICT (Inductive Coupling Technology) point source driver for extended frequency range; Pre-install version supplied without back can (available separately); High durability design for constant heavy usage in demanding applications; UL 1480 certified for general signalling systems; UL 2043 certified for air-handling spaces; Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input; Low insertion loss 60 W line transformer with easily accessible tapping switch; Optimised for LAB GRUPPEN low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel; Semi matt white finish fits unobtrusively in any environment; Powder coated UV resistant perforated steel mesh grille with dust protection; Removable magnetic grille for custom painting; Optional ARCO designer grilles available for minimal architectural impact; Self-aligning 4 way clamp mounting system; Mounting C-ring and ceiling tile rails included
Mt_Sku0301-ABC86-000