Tannoy 0301-AAY86-000 CMS 503ICT LP Ceiling Loudspeaker
The CMS 503ICT LP is a wide-bandwidth ceiling loudspeaker from Tannoy's third-generation CMS 3.0 range, rated 50 W continuous and 200 W peak. Its 5-inch ICT (Inductive Coupling Technology) point-source driver extends the frequency range and keeps coverage consistent, and Tannoy builds ICT drivers for long-term reliability in spaces where the system runs all day. This LP version uses an ultra-shallow back can for ceilings with little cavity space above them.
A self-aligning 4-way clamp system makes installation quick. A low-insertion-loss 30 W transformer with a front-panel tap switch covers 70 V and 100 V lines, or set it to 16 ohms for direct drive. Wiring lands on a removable locking screw-terminal connector with loop-through. The paintable powder-coated steel mesh grille has dust protection, two tile support rails and a C-ring come in the box, and an Arco grille that hides the whole unit and a plaster (mud) ring are optional. Finished in semi-matt white, it is optimised for LAB GRUPPEN LUCIA amplifiers, which run up to eight CMS speakers per channel.
| System Sensitivity (1 W @ 1 m) | 89 dB (1 W = 4 V for 16 Ohms) |
|---|---|
| Coverage Angle | 90 degrees conical |
| Power Handling | 50 W average, 100 W programme, 200 W peak |
| Nominal Impedance (Lo Z) | 16 Ohms |
| Rated Maximum SPL | 106 dB average, 112 dB peak |
| Transformer Taps 70 V | 30 W / 15 W / 7.5 W / 3.75 W / OFF & low impedance |
| Transformer Taps 100 V | 30 W / 15 W / 7.5 W / OFF & low impedance |
| Crossover | 7 kHz inductively coupled |
| Transducer | 130 mm (5.00 in) mineral loaded polypropylene LF, ICT aluminium dome HF |
| Hole Cutout Diameter | 253.0 mm (9.96 in) |
| Net Weight (ea) | 4.4 kg (9.70 lbs) |
| Compliance | UL-1480, UL-2043, CE |
| Included | C-Ring, tile-bridge kit, paint mask, cut-out template, grille |
| Model_Code | 0301-AAY |
| Features | Full range ceiling loudspeaker for installation applications; 50 Watts continuous, 200 Watts peak power; 5" ICT (Inductive Coupling Technology) point source driver for extended frequency range; Ultra-shallow depth profile for applications where cavity space is restricted; High durability design for constant heavy usage in demanding applications; UL 1480 certified for general signalling systems; UL 2043 certified for air-handling spaces; Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input; Low insertion loss 30 W line transformer with easily accessible tapping switch; Optimised for LAB GRUPPEN low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel; Semi matt white finish fits unobtrusively in any environment; Powder coated UV resistant perforated steel mesh grille with dust protection; Removable magnetic grille for custom painting; Optional ARCO designer grilles available for minimal architectural impact; Self-aligning 4 way clamp mounting system; Mounting C-ring and ceiling tile rails included |
| Mt_Sku | 0301-AAY86-000 |
