Shop All Shure
Shure MXP-6B Microflex Pendant Passive Loudspeaker, Black
The MXP-6 is a 2-way pendant loudspeaker with a 4 in main driver and a 1 in neodymium tweeter, voiced the same as the MXP-5 ceiling speaker. A rear switch selects 70/100 V transformer or 4 ohm operation.
Up to eight run from one MXN-AMP. The finish is paintable. The MXP-6B is black. In the box: Microflex MXP-6 Pendant Passive Loudspeaker; Shure logo pin; 4-pin block connector.
- Dimensions10.96 x 9.06 x 9.06 in.
- Storage Temperature Range-29 to 74°C (-20 to 165°F)
- Connector Type4-pin connector, 0.2 in. pitch
- Maximum Input Power28W (IEC standard 60268-5)
- Frequency Response~90Hz to 20kHz
| Weight | 5.5 lbs (2.5 kg) |
|---|---|
| Dimensions | 10.96 x 9.06 x 9.06 in. (278.5 x 230.2 x 230.2 mm) |
| Connector Type | 4-pin connector, 0.2 in. (5.08 mm) pitch |
| Coverage Angle | 95° (Average of 1 octave band centered on 4 kHz, IEC standard 60268-5 23.4) |
| Frequency Response | ~90Hz to 20kHz |
| Nominal Impedance | 4Ω |
| Maximum Input Power | 28W (IEC standard 60268-5) |
| Maximum SPL | AES75 max linear sound levels: 98 dBZ, 113 dBZpk, 97 dBA (at an RMS input level of 23 dBV) |
| Sensitivity | 93 dB SPL (at 2.83 V/1m) |
| Operating Temperature Range | -7 to 40°C (19.4 to 104°F) |
| Storage Temperature Range | -29 to 74°C (-20 to 165°F) |
| Transformer Taps | 70V: 4Ω, 1.875 W, 3.75 W, 7.5 W, 15 W; 100V: 4Ω, 3.75 W, 7.5 W, 15 W |
| Source | Full specifications on shure.com |

- Microflex MXP-6 Pendant Passive Loudspeaker
- Shure logo pin
- 4-pin block connector









