Shop All Shure
Shure MX418/N Microflex 18 in Gooseneck Microphone, No Cartridge
The MX418 is an 18 inch Microflex gooseneck condenser microphone for lecterns, conference tables, courtrooms and houses of worship. The cartridge is interchangeable and fits every Microflex model: C is cardioid, S supercardioid and N ships with no cartridge.
In the box: 65B8264 Flange; 65B8265 Retainer; 80A439 Isolation Ring; RK412WS Snap-fit Foam Windscreen (1 furnished, 4 in replacement kit); A400SM Shock Mount; 80A67 Hex Wrench #4.
- Connector3 Pin XLR
- Frequency Response50 Hz-17 kHz
- SensitivityCardioid: -35.00, Supercardioid: -34.00 dBV/Pa
- Phantom Power11-52 VDC
- Weight161 g (0.355 lb)
| Type | Gooseneck microphone |
|---|---|
| Configuration | Condenser Microphone, No Capsule Included, 45.7 cm / 18 Inch Gooseneck, Bottom Cable Exit, Preamp Included, Black, 3-pin Connector |
| Gooseneck Length | 18 in (45.7 cm) |
| Frequency Response | 50 Hz-17 kHz |
| Weight | 161 g (0.355 lb) |
| Transducer Type | |
| Form Factor | Gooseneck |
| 11-52 VDC | |
| Sensitivity | Cardioid: -35.00, Supercardioid: -34.00 dBV/Pa |
| Self Noise | Cardioid: 28 dB SPL, Supercardioid: 27 dB SPL |
| Maximum SPL | Cardioid: 121 dB, Supercardioid: 120 dB |
| Impedance | Rated: 150 / Actual: 180 ohms |
| Color | Black |
| Connector | 3 Pin XLR |
| Cable Exit | Bottom |
| Preamp Included | Yes |
| Surface Mount | Flange |
XLRThe three-pin balanced audio connector used on professional microphones and mixers.
CondenserA microphone type with a powered capsule. Usually more sensitive and detailed than a dynamic.
Phantom powerPower for condenser microphones, usually 48 V, sent down the microphone cable from the mixer or interface.

- 65B8264 Flange
- 65B8265 Retainer
- 80A439 Isolation Ring
- RK412WS Snap-fit Foam Windscreen (1 furnished, 4 in replacement kit)
- A400SM Shock Mount
- 80A67 Hex Wrench #4









