Shop All Shure
Shure MX412S/C Microflex 12 in Gooseneck Microphone, Mute Switch, Cardioid
The MX412 is a 12 inch Microflex gooseneck condenser microphone for lecterns, conference tables, courtrooms and houses of worship. The cartridge is interchangeable and fits every Microflex model: C is cardioid, S supercardioid and N ships with no cartridge.
In the box: 65B8264 Flange; 65B8265 Retainer; 80A439 Isolation Ring; RK412WS Snap-fit Foam Windscreen (1 furnished, 4 in replacement kit); A400SM Shock Mount; 80A67 Hex Wrench #4.
- Dimensions (H x W x D)330.7 x 11.68 x 11.68 mm
- Connector3 Pin XLR
- Frequency Response50 Hz-17 kHz
- SensitivityCardioid: -35.00, Supercardioid: -34.00
- Phantom Power11-52 VDC
| Type | Gooseneck microphone |
|---|---|
| Configuration | Condenser Microphone, Cardioid, 30.5 cm / 12 Inch Gooseneck, Green LED at the Bottom, Bottom Cable Exit, Preamp Included, Black, 3-pin Connector |
| Gooseneck Length | 12 in (30.5 cm) |
| Frequency Response | 50 Hz-17 kHz |
| Weight | 160 g (0.353 lb) |
| Dimensions (H x W x D) | 330.7 x 11.68 x 11.68 mm |
| Transducer Type | |
| Form Factor | Gooseneck |
| 11-52 VDC | |
| Sensitivity | Cardioid: -35.00, Supercardioid: -34.00, Omnidirectional: -27.5 dBV/Pa |
| Self Noise | Cardioid: 29.0 dB(A), Supercardioid: 28.0 dB(A), Omnidirectional: 70.5 dB(A) |
| Maximum SPL | Cardioid: 124.2 dB, Supercardioid: 122.7 dB, Omnidirectional: 116.7 dB |
| Impedance | Rated: 150 / Actual: 180 ohms |
| Color | Black |
| Connector | 3 Pin XLR |
| Cable Exit | Bottom |
| Preamp Included | Yes |
| Mute Switch | Yes |
| Surface Mount | Flange |
XLRThe three-pin balanced audio connector used on professional microphones and mixers.
CondenserA microphone type with a powered capsule. Usually more sensitive and detailed than a dynamic.
Phantom powerPower for condenser microphones, usually 48 V, sent down the microphone cable from the mixer or interface.

- 65B8264 Flange
- 65B8265 Retainer
- 80A439 Isolation Ring
- RK412WS Snap-fit Foam Windscreen (1 furnished, 4 in replacement kit)
- A400SM Shock Mount
- 80A67 Hex Wrench #4









