Sachtler System aktiv6 flowtech75 GS
The Sachtler System aktiv6 flowtech75 GS is a complete support system built around the aktiv6 fluid head on a 2-stage carbon fibre tripod with ground spreader. It is rated for 0 - 8 kg (0 - 17.6 lb) on a 75 mm bowl, with 15 + 0 steps of counterbalance and 3 + 0 steps of drag on pan and tilt, so the head is set to the camera rig rather than the nearest setting. Camera fitting is Sideload with 12 cm (4.7 in) of sliding range to find the balance point.
Set up, the system stands 56 - 176 cm (22 - 69.3 in) and folds to 85 cm (33.5 in) for transport. Complete system weight is 6.4 kg (14.1 lb). Tilt range is 90° to -70°, and the head is rated for -40°C to 60°C (-40°F to 140°F). Sachtler part number S2064S-FTGS.
| Fluid Head | aktiv6 |
|---|---|
| Range | aktiv |
| Payload at 100 mm CoG | 0 - 8 kg (0 - 17.6 lb) |
| Bowl Size | 75 mm |
| Counterbalance | 15 + 0 counterbalance steps |
| Drag | 3 + 0 drag settings |
| Tilt Range | 90° to -70° |
| Interface Compatibility | Sideload |
| Sliding Range | 12 cm (4.7 in) |
| Pan Bar Count | 1 |
| Material | Carbon Fibre |
| Tripod Stages | 2 |
| Spreader Type | Ground spreader |
| Height With Ground Spreader | 56 - 176 cm (22 - 69.3 in) |
| Height Without Spreader | 23 - 170 cm (9.1 - 66.9 in) |
| Transport Length | 85 cm (33.5 in) |
| Weight | 6.4 kg (14.1 lb) |
| Temperature Range | -40°C to 60°C (-40°F to 140°F) |
| Part Number | S2064S-FTGS |
| Category | flowtech Systems |








