Shop all Rode
Rode Charge Case+ for Wireless GO (Gen 3) and Wireless PRO
The Charge Case+ is the travel case for a Wireless GO (Gen 3) or Wireless PRO kit that also charges it. All three units - two transmitters and the receiver - charge at the same time from a 4200mAh internal battery, which is good for two full recharges and about 21 hours of additional runtime.
It differs from the older case in two ways: the units stay accessible for file transfer while docked, and the case passes data as well as power, so on-board recordings can be pulled without unpacking. Input is USB-C at 5V/3A with a 3A maximum charge current and roughly a two-hour charge time. The case weighs 185g empty.
| Battery Capacity | 4200 mAH |
|---|---|
| Configuration | 1 x RX / 2 x TX |
| Charging Time | Approx. 2 hours |
| Charge Current | 3A (max) |
| Data Transfer | Yes |
| Input | USB-C |
| Power Requirements | 5V/3A |
| Weight (grams) | 185 (case only) / 280 (with Wireless units) |













