PTZOptics HCM-1C Small Universal Camera Pole Mount (White)

When the camera has to hang out over a room rather than sit against a wall, the HCM-1C puts it on a 1-inch NPT threaded pipe. The threaded collar takes the pipe, a set screw locks it, and the camera cable is fed up through the pipe so nothing dangles. It works upright or inverted, so the same bracket serves a high side-wall drop or a straight ceiling drop.

The camera attaches with a plain 1/4-20 screw, which is why it fits every PTZOptics camera and most small-based Sony, Panasonic, Vaddio, Cisco, Polycom, DataVideo and Lumens heads. It is fabricated from steel in Pennsylvania, finished in white powder coat, and carries a ten-year limited parts and labour warranty. In the box: the mount, the quarter-twenty camera screw, a set screw, and the rest of the hardware needed to secure it to the pipe.