PunQtum Q210 P 4-Channel Partyline Speaker Station
The Q210 P is the hub of a PunQtum wired partyline system in one rack unit. It talks on all four channels at once through a built-in 5 W loudspeaker with a gooseneck mic, or through a headset on the 4-pin XLR. Four programmable buttons handle mic mute, PA announcements, talk to all and logic outputs, and missed calls can be replayed from the color display.
A four-port network switch is built in, two ports with PoE+ that power up to four Q110 beltpacks each. For outside audio it has two 4-wire ports, two balanced analog inputs and outputs, two program inputs, two PA outputs and four GPI inputs and outputs. Paired with Riedel's Bolero Connect it carries six partyline channels over one network cable. It runs from the supplied AC/DC adapter.
- Channels4 partyline channels
- Headset connectorXLR 4pin male
- Ethernet/LAN connector4x RJ-45 EtherCon
- Microphone connector1/4" jack with 7/16"-20 UNF thread
- Frequency response20Hz to 7kHz (+0/-0.25dB)
| Part number | 4900031 |
|---|---|
| Channels | 4 partyline channels |
| Power source | 50 to 54 VDC |
| PoE power | 30W per Port |
| Headset connector | 4pin male |
| Ethernet/LAN connector | 4x RJ-45 EtherCon |
| Microphone connector | 1/4" jack with 7/16"-20 UNF thread |
| Built-in speaker | 5 Watts |
| GPI | 4 inputs (optocoupler, 5 to 50 VDC), 4 outputs (PhotoMOS relay) |
| Sampling rate | 16 kHz |
| Frequency response | 20Hz to 7kHz (+0/-0.25dB) |
| Operating temperature | -10 to +50 C |
| D x W x H | 19" 1RU: 100 x 433 x 44 mm |
| Weight | 1.7 kg |

- Q210 P speaker station
- AC/DC adapter
- Power cord
- Quick start guide
- Update flyer




