MOTU ZBox Guitar Pickup Impedance Adapter
Amp-modelling plug-ins model the amp but not the amp's input, and a guitar plugged into an interface preamp sees the wrong load, which thins out the tone. ZBox sits between the guitar and the mic/instrument input and matches the pickup's output impedance to it, using circuits that emulate the two-jack Hi and Low input network on many classic amps, including an analog simulation of the input tube grid.
It needs no power, software or drivers. A built-in 16-inch cable with a 1/4-inch plug goes into the interface or any other instrument input, such as a wireless transmitter or a mixer, and the guitar cable plugs into the ZBox. The metal housing measures 1 x 1.75 x 2.5 inches, and MOTU covers it with a two-year warranty.
- PowerNo power required
- FunctionGuitar pickup impedance adapter
- CableBuilt-in 16-inch cable with quarter-inch plug
- HousingMetal, 1 x 1.75 x 2.5 inches / 2.54 x 4.45 x 6.35 cm
| Function | Guitar pickup impedance adapter |
|---|---|
| Power | No power required |
| Software | No software or drivers required |
| Cable | Built-in 16-inch cable with quarter-inch plug |
| Compatibility | Audio interfaces equipped with preamps (Mac or PC); other devices with guitar ("instrument") inputs |
| Housing | Metal, 1 x 1.75 x 2.5 inches / 2.54 x 4.45 x 6.35 cm |
| Warranty | Two-year warranty |






