KanexPro logo
Shop All KanexPro

KanexPro AP3DBL Compact 40W 70V/100V Audio Amplifier with Mic Mixer

The AP3DBL drives a 70V or 100V distributed speaker line from a single 40W mono output. Three switchable program inputs cover dual-mono RCA, 3.5mm stereo and TOSLINK optical, and a separate mic input is always live and mixed in at its own level. A rear dial sets the mic input for condenser mics on 48V phantom power, dynamic mics, or a wireless receiver at line level, balanced or unbalanced.

Ducking lowers the program audio when the mic picks up a voice and brings it back after 5 seconds of silence, which is what a classroom, lecture hall, restaurant or meeting room needs for paging over music. Volume, bass and treble adjust from the front panel, the IR remote or RS232 (3-pole captive screw, 9600 baud, 8N1), and 16 addressable ID codes let one control loop run several units. A stereo line output feeds another zone amplifier or a recorder. Power comes from the included 24V DC adapter on a locking connector.

Part NumberAP3DBL
Program InputsInput 1: dual-mono RCA; Input 2: 3.5mm stereo; Input 3: TOSLINK digital optical
Amplifier OutputMono 40W, switchable 70V / 100V
MIC Input3-pole captive screw, balanced or unbalanced
MIC Modes48V phantom (condenser), MIC (dynamic), LINE (wireless receiver)
MIC Input Impedance35 kOhm (48V), 10 kOhm (MIC), 75 kOhm (LINE)
DuckingAttenuates line audio when MIC signal is detected; recovers after 5 seconds of silence
Tone ControlsVolume, Bass, Treble via front panel, IR remote and RS232
Line OutputStereo line audio output
RS2323-pole captive screw (TX=2, RX=3, GND=5), 9600 baud, 8N1
RS232 ID Codes16 (0 to F hex), ID loop pass-through
IRIR remote and external IR receiver support
CoolingConvection cooled, antistatic case
Power24V DC adapter (included), locking connector
CertificationsCE, FCC, UL
UPC814556016077
BrandKanexPro