Kramer VM-218DTXR 2x1:8 4K60 4:2:0 HDMI & Extended-Reach HDBaseT with Ethernet, RS-232, IR and Stereo Audio, Switchable
The Kramer VM-218DTxr is a 1U distribution amplifier that takes either an HDMI or an extended-reach HDBaseT input and sends it out to eight HDBaseT outputs, each carrying its own Ethernet, RS-232 and IR alongside 4K@60Hz 4:2:0 video. Placed mid-way between a source and a spread of remote displays, it re-extends the signal: up to 100m (330 ft) at 4K on each side, 130m at 1080p, and 180m in HDBaseT ultra mode at 1080p 24bpp, on Kramer HDBaseT cable.
A looping HDMI output feeds a local monitor or the next DA, and audio is de-embedded to a 3.5mm stereo output. It passes HDCP 1.4, deep color, 7.1 PCM, Dolby TrueHD and DTS-HD, and Kramer's I-EDIDPro handles EDID. Front-panel buttons pick the input, volume and EDID, with RS-232, Ethernet and DIP-switch control. The aluminum chassis is fan cooled, runs on 100-240V AC and ships with a power cord and rack ears.
| Model | VM-218DTXR |
|---|---|
| Inputs | 1 , 1 HDBaseT (RJ-45), selectable |
| Outputs | 8 HDBaseT (RJ-45), 1 HDMI loop, 1 stereo analog audio (3.5mm) |
| Ports | 1 Ethernet, 8 IR (3.5mm), 8 RS-232 (terminal blocks) |
| Max. Resolution | 4K@60Hz (4:2:0) 24bpp |
| Max. Data Rate | 10.2Gbps (3.4Gbps per graphic channel) |
| Range | 100m (330 ft) at 4K60; 130m (430 ft) at 1080p60 36bpp; 180m (590 ft) ultra mode |
| Standards | HDCP 1.4, HDBaseT 1.0 |
| Power | 100-240V AC 50/60Hz |
| Dimensions | 43.6 x 23.72 x 4.36 cm (19 x 9.34 in x 1U) |
| Included | Power cord, rack ears |
