Kramer ADC-U31C/M1 USB 3.1 Type - C to VGA & USB 3.0 & PD Adapter Cable
The Kramer ADC-U31C/M1 is a short USB-C multiport adapter with three sockets on the far end: VGA video, a USB 3.0 Type-A port, and a USB-C Power Delivery port. It connects a USB-C laptop to a VGA projector or monitor at up to 1080p at 60Hz while still leaving a USB port free for a thumb drive, phone or hard drive.
Plug the laptop charger into the PD port and it passes up to 60W (20V/3A) back through to charge the laptop, so presenting does not drain the battery. It is bus powered, needs no drivers on Windows or Mac, and the source must support DisplayPort Alt Mode for video. The white PVC sheath is 4.2mm and the adapter is about 170mm long. RoHS, CE and FCC compliant.
| Model | ADC-U31C/M1 |
|---|---|
| Connector A | USB Type-C (M), input |
| Outputs | 1 VGA (F), 1 USB 3.0 Type-A (F), 1 USB-C PD (F) |
| Resolution | 1080p @60Hz, wide screen supported |
| Charging | Pass-through up to 60W (20V/3A) |
| Requirement | Source must support DisplayPort Alt Mode over USB-C |
| Length | 170mm +/-10mm |
| Compliance | RoHS, CE, FCC |
